Matrix PRASAR UCS - Page 392

Matrix PRASAR UCS System Manual 383
• In Number you can enter may be a complete telephone number, a truncated phone number or an area
code. You may enter upto 64 characters (Digits + “Wildcard Characters”) in this field. Valid characters: 0 to
9, *, #, X, T, Comma [,], Hyphen [-], Caret [^ ]. Default: Blank.
• Click Submit.
Wildcard Characters
PRASAR UCS supports following characters.
Refer the following table to understand how you can configure the Numbers.
Character Description
X (letter X) X represents any single digit from 0 to 9.
#
When # is configured in a number string, it will not be considered as End of Dialing.
*
When * is configured in a number string, it will not be considered as End of Dialing.
+
+ (plus) can be configured as a first character of the Destination Number string in the
SIP Trunk only.
[
- ]
Hyphen within the bracket, defines a range. Only digits 0-9 are allowed within a bracket.
[ , ] Comma within a bracket is used as a separator between the groups of numbers.
[ ^ ]
Caret within a bracket is used to deny or restrict the number or range defined after the
symbol. Only digits 0-9 are allowed after the caret.
T (letter T)
Character T can be configured only as a last character in a number string. When
configured in a number string, the system waits for End of Dialing.
Numbers Description
1XX Allows you to dial any number in a range from 100 to 199.
[2-5]XX Allows you to dial any 3 digit number in a range from 200-599.
[2,3,8]XX
Allows you to dial any 3 digit number in the range from 200-299, 300-399, 800-
899.
[2-9]XXXXXX Allows you to dial any 7 digit number in the range from 2000000-9999999.
23[^2]1
Allows you to dial a 4 digit number: 2301, 2311, 2331, 2341, 2351, 2361, 2371,
2381, 2391.
2630[500-550] Allows you to dial a 7 digit number in the range from 2630500-2630550.
[^6-7]X
Allows you to dial a 2 digit number in the range from 00 to 99 except the numbers
from 60 to 79.
1234 Allows you to dial 1234 number only.
011T
Allows you to dial any number starting with 011. The number must be of minimum
3 digits and maximum digits must be as configured for the port.