Matrix PRASAR UCS - Page 420

Matrix PRASAR UCS System Manual 411
Call Transfer Settings
70
• Under Working Hour - WH, select the Call Transfer Profile you want system to use for transferring the
calls during Working Hours. The drop down list will include the profiles you configure in the “Call Transfer
Profile”.
• Under Break Hour - BH, select the Call Transfer Profile you want system to use for transferring the calls
during Break Hours. The drop down list will include the profiles you configure in the “Call Transfer Profile”.
• Under Non-Working Hour - NH, select the Call Transfer Profile you want system to use for transferring
the calls during Non-Working Hours. The drop down list will include the profiles you configure in the “Call
Transfer Profile”.
Message Wait Settings
71
•In Message Wait Indication, select the type of indication to be given to the extension user for new
messages in the mailbox and message wait set by another extension user. This is only applicable when
you select Extension as the “Select Number” option.
Select the desired option per your requirement:
• Stuttered Dial Tone: When the extension user goes OFF-Hook, s/he will hear a stuttered dial tone.
• Silence: No indication will be provided to the extension user for Message Wait Notification, when s/he
goes OFF-Hook.
Default: Silence.
70. Not applicable when you select General Mailbox as the “Select Number” option.
71. Not applicable when you select Operator as the “Select Number” option.