412 Matrix PRASAR UCS System Manual
Refer the feature description “Message Wait” to know more.
Message Wait Notification via Call
72
The message wait notification will be sent to a number (destination number). This number can be an internal or an
external number.
•In Type, you may select — Immediate, Scheduled or None.
• Select Immediate, if you want the notifications to be sent as soon as a new message arrives in the
mailbox of the extension user.
• Select Scheduled, if you want the notification to be sent at fixed time schedules.
• Select None, if you do not want to set message wait notification via call.
Default: None.
•In Schedule Profile, select the Notification via Call - Profile number according to which you want the
system to send the notifications. The Notification via Call Profile determines how notification calls are to be
made to the destination numbers. To know more, see “Message Wait Notification via Call”.
•In Destination Number, configure the number that you want the system to use for sending the notification
via calls.
The destination number can be an internal or an external number. The destination number can be a
maximum of 16 digits. Valid digits are 0 to 9, # and *.
When the notification call is answered, the VMS informs the callee about the new message and allows the
callee to access it.
Refer the feature description “Message Wait Notification via Call” to know more.
Message Wait Notification via E-Mail
73
The message wait notification will be sent to the e-mail address of the extension user.
•In Notification, you may select — Do not send, Without Attachment, With Attachment or With Attachment
and mark voicemail as read. Default: Do not send.
• Select Do not send, if you do not want the system to send email notification to the user for new
message even if the email ID is configured. In this case, the system will send the Mailbox Memory
Usage notification.
• Select Without Attachment, if you want the system to send email notification to the user for new
message if the email ID is configured.
• Select With Attachment, if you want the system to send email notification to the user for new message
along with the message as attachment. Make sure the email ID is configured. The attachment will be
72. Applicable only when you select Extension as the “Select Number” option.
73. Not applicable when you select Operator as the “Select Number” option.
To Next Page
Loading...