Matrix PRASAR UCS - Page 455

446 Matrix PRASAR UCS System Manual
Destination Number Confirmation
This option is applicable only if you have selected the Confirm Number Collected check box.
You can assign the Digits (0-9, *, # or None) to each of the options — Confirm, Re-enter.
Make sure you do not assign the same digit to both the options.
The digit you configure will be played as the digit to be dialed by the extension user to select the respective option.
The options will be played in the sequence — 1-9, 0, *, #. The option for which the Digit selected is None will not be
played.
After the digits have been assigned, the system will proceed further as per the options selected by you. Given
below is a brief description of each option:
• Confirm: The system will save the destination number/s collected considering they are valid.
• Re-enter: The system will clear all the destination numbers collected and ask the extension user to enter
the destination number/s again.
•In No Digit Dialed Action, select the option — Confirm or Re-enter. This is applicable when the extension
user has not dialed any digit for Destination Number Confirmation. The system will function as per the
option you select.
Forward Message Option
You can assign the Digits (0-9, *, # or None) to each of the options — With Comment at Start, With Comment at
End, Without Comment or Go to Previous Menu.
Make sure you do not assign the same digit to multiple options.
The digit you configure will be played as the digit to be dialed by the extension user to select the respective option.
The options will be played in the sequence — 1-9, 0, *, #. The option for which the Digit selected is None will not be
played.