Matrix PRASAR UCS - Page 456

Matrix PRASAR UCS System Manual 447
After the digits have been assigned, the system will proceed further as per the options selected by you. Given
below is a brief description of each option:
• With Comment at Start: The system will provide an option to the extension user for recording a message
in addition to the existing recorded message before forwarding the message to the destination number/s.
The additional message will be added as the initial part of the message i.e. will be added at the beginning
of the message.
• With Comment at End: The system will provide an option to the extension user for recording a message
in addition to the existing recorded message before forwarding the message to the destination number/s.
The additional message will be added as the final part of the message i.e. will be added at the end of the
message.
• Without Comment: The system will provide an option to the extension user for sending the recorded
message to the destination number/s without adding any additional comment to it.
• Go to Previous Menu: The system will provide an option to the extension user to go back to the Mailbox
Access Main Menu.
•In No Digit Dialed Action, select the option — With Comment at Start, With Comment at End or Without
Comment. This is applicable when the extension user has not dialed any digit for Forward Message
Option. The system will carry out the function when no digit is dialed as per the option you select.
Message Send Options
Message Send Options will be played based on the configuration of the parameters — Message Verification,
Message Type and Message Sensitivity.
You can assign the Digits (0-9, *, # or None) to each of the options — Re-record, Confirm, Urgent,
Private(Confidential), Listen Recorded Message and Append to Recorded Message.
Make sure you do not assign the same digit to multiple options.
The digit you configure will be played as the digit to be dialed by the extension user to select the respective option.
The options will be played in the sequence — 1-9, 0, *, #. The option for which the digit selected is None will not be
played.
After the digits have been assigned, the system will proceed further as per the options selected by you. Given
below is the brief description of each option: