Matrix PRASAR UCS System Manual 67
• Reverse the handset wall mount tab to make sure that the handset remains intact when you mount the
phone. Push the handset wall mount tab upwards to remove it from the slot. Rotate it 180 degrees
clockwise and push it downwards into the slot.
If you are unable to remove the wall mount tab, you may use a tool like a minus screw-driver to remove it.
• When you mount the phone on a desk,
• You can attach the Foot Stand in the following ways — at an angle of 45 degrees or 55 degrees
• Decide which of these positions would work for you best and accordingly attach the Foot Stand.
Stand attached at
Stand attached at
To Next Page
Loading...