MCM MODELS- BRAVO MODELS WITH DRIVE SHAFT EXTENSIONS - 2D-1590-823225--1 1096
b. On Engines with Thru-Transom Exhaust:
NOTICE (THRU-TRANSOM EXHAUST)
Exhaust hoses must be connected to ex-
haust elbows so that they do not restrict the
flow of discharge water from exhaust elbow.
If hoses are connected incorrectly, dis-
charge water from exhaust elbow will not
flow around entire inside diameter of hose.
This will cause a hot spot in the hose which
may eventually burn through.
72538
CORRECT
INCORRECT
Clamps Not Shown
11. Connect battery cables to battery by FIRST con-
necting positive (+) battery cable (usually red) to
positive (+) battery terminal. Tighten clamp se-
curely. Then, connect negative (–) battery cable
(usually black) to negative (–) battery terminal.
Tighten clamp securely.
NOTE: Spray terminals with a battery connection
sealant to help retard corrosion.
To Next Page
Loading...
