MERCARB 2 BARREL CARBURETOR - 5B-2590-823225--1 1096
9. Secure idle cam (with choke rod installed on
cam) on float bowl assembly, using screw. Check
that cam is free to move without binding.
72282
b
c
a
a - Screw
b - Idle Cam
c - Choke Rod
10. Place accelerator pump rod (end with ear) in hole
in pump shaft and lever assembly.
72393
b
a
a - Accelerator Pump Rod
b - Pump Shaft and Lever Assembly
11. Insert remaining end of accelerator pump rod into
hole in throttle lever and secure with retainer clip.
72283
b
c
a
a - Accelerator Pump Rod
b - Throttle Lever
c - Retainer Clip
CHOKE HOUSING ASSEMBLY
1. Install choke housing on air horn; tighten screws
securely. Install choke lever; tighten screw se-
curely.
72401
b
c
a
a - Choke Housing
b - Choke Housing Attaching Screws
c - Choke Lever
To Next Page
Loading...
