5D-20 - WEBER 4 BARREL CARBURETOR 90-823225--1 1096
2. Remove wire clip to disconnect choke plate link-
age.
70391
70392
b
a
b
a - Wire Clip
b - Choke Plate Linkage Rod
NOTE: Do not remove vacuum hose if not servicing
diaphragm.
3. Disconnect vacuum hose from choke pull-off dia-
phragm.
70393
b
a
a - Vacuum Hose
b - Choke Pull-Off Diaphragm
4. Remove screws from choke pull-off diaphragm
bracket to disengage choke pull-off linkage.
NOTE: Depending on amount of service required, it
may not be necessary to remove diaphragm and
bracket.
70394
b
a
a - Screws
b - Linkage Rod
IMPORTANT: Metering rods should always be re-
moved before separating top and bottom halves
of carburetor.
To Next Page
Loading...
