90-823225--1 1096 WEBER 4 BARREL CARBURETOR - 5D-21
5. Loosen (not necessary to remove, depending on
amount of service required) metering rod cover
screws. Turn cover, or remove, to expose meter-
ing rod.
71094
71095
b
a
c
a - Screws
b - Metering Rod Cover(s)
c - Air Deflectors If Equipped)
IMPORTANT: Be careful not to mix metering rods
when removing them.
6. Carefully lift metering rod assemblies straight
out.
70396
a
a - Metering Rod Assembly(s)
7. Remove metering rod springs.
IMPORTANT: Metering rod springs are color
coded and should not be interchanged with other
carburetors.
70397
a
a - Spring(s)
8. Remove nine screws to separate top and bottom
halves of carburetor.
70398
a
a - Screw(s)
To Next Page
Loading...
