90-823225--1 1096 WEBER 4 BARREL CARBURETOR - 5D-33
16. Install accelerator pump in top of carburetor
housing, after placing washer and guide in posi-
tion.
70450
a
b
c
a - Accelerator Pump
b - Plunger Guide
c - Plunger Washer (Not Visible In This View)
17. Connect accelerator pump lever to pump rod us-
ing the S-link. Secure pump lever with pivot
screw. Tighten securely. Check to ensure lever
actuates the accelerator pump.
70449
b
a
c
d
a - Accelerator Pump Lever
b - Accelerator Pump
c - S-Link
d - Retainer Screw
18. Install gasket on top of carburetor.
70448
a
a - Gasket
19. Install inlet filter in bottom of inlet seat. Install inlet
seat with gasket in place. Tighten securely.
70447
b
a
c
a - Seat
b - Gasket
c - Inlet Filter
To Next Page
Loading...
