5D-34 - WEBER 4 BARREL CARBURETOR 90-823225--1 1096
IMPORTANT: If using existing needles and seats,
be sure to reinstall them as matched sets, as
noted during disassembly.
20. Install appropriate inlet needles into inlet seats.
70446
b
a
70401
a
b
a - Inlet Needle(s)
b - Seat(s)
IMPORTANT: If using existing floats, be sure to
reinstall them on the same side as removed.
21. Install floats using hinge pins.
70400
a
a
b
b
a - Pin(s)
b - Floats(s)
22. Carefully lower top of carburetor onto bottom
part.
70399
To Next Page
Loading...
