6A-14 - SEAWATER COOLING MODELS 90-823225--1 1096
7. Bravo models need to remove both hoses from
seawater pump.
71170
a
a - Seawater Inlet And Outlet Hoses
8. For 1996 and newer models, the additional
following steps must be performed:
a. Remove the drain plug from the Y-fitting from
the port side of the block.
a
a - Drain Plug
b. Remove the drain plug from the water tube
(carburetor models) or Cool Fuel system (fuel
injection models).
75018
75081
a
b
a - Drain Plug (Cool Fuel System - Fuel Cool System)
b - Drain Plug (Water Tube - Carburetor Models)
To Next Page
Loading...
