8C-20 - HURTH DOWN ANGLE TRANSMISSION 90-823225--1 1096
b. Pull bearing cup from housing using tool as
shown.
27681
c. Input Housing Side: Remove and retain
shims. DO NOT MIX UP.
27682
TAPERED ROLLER BEARINGS
!
CAUTION
Gears should never be removed from intermedi-
ate shaft or output shaft, as this will affect proper
gear alignment.
1. Remove tapered roller bearings from intermedi-
ate shaft and output shaft by using a universal
puller plate and pressing bearings off.
71046
71045
To Next Page
Loading...
