4.6.17.1 LEDs in the module cover
The module cover can be found at the rear of the device.
④④
LED 1 LED 2 LED 3
No function
LED 4
Off No connection (HW) Offline, no connecti-
on
Not initialized
Constant green Connection (HW) Online, link establis-
hed
Initialized, no error
Flashing green Send/receive data Online in stop
Flashing green,
quickly
Engineering tool for
identification is acti-
ve
Flashing red Configuration error,
no station name/IP
address, internal er-
ror
4 Device installation X3 Process Indicator PR 5410
Minebea Intec EN-115
To Next Page
Loading...
