Minebea Intec X3 User Manual

7.6 Displaying/deleting alibi entries using the front-panel keys
The alibi memory of the device can be displayed and/or deleted directly using the front-
panel keys.
7.6.1 Displaying/deleting alibi entries
1. Press
.
SEtuP appears on the display.
2. Press OK.
The "Cd" calibration menu flashes.
Cd 000 appears on the display.
3. Press multiple times to select "nP 080."
4. Press OK.
dHCP (DHCP) appears on the display.
5. Press OK.
on appears on the display.
6. Press OK.
nP 081 appears on the display.
7. Press OK.
IP.Addr appears on the display.
8. Press OK.
The more significant part of the address 172.024. (example) appears on the
display.
9. Press to display the less significant part of the address.
020.128. (example) appears on the display.
10. Press "Exit" multiple times to exit the Setup menu.
1. Press
.
SEtuP appears on the display.
2. Press OK.
Cd 000 appears on the display.
7 Getting started X3 Process Indicator PR 5410
Minebea Intec EN-145

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English