15 Disposal
Our products and their packaging should not be disposed of in municipal waste (e.g.
garbage can for recyclable packaging, garbage can for paper packaging, etc.). They can
either be recycled by the customer themselves, providing this complies with
requirements set out by electrical or electronic waste or packaging waste laws, or sent
back to Minebea Intec at a charge.
This option of returning the product is intended to provide proper recycling or reuse in a
manner that is collected separately from municipal waste.
Before disposing of or scrapping the old products, any single-use or rechargeable
batteries should be removed and taken to a suitable collection point. The type of battery
used is specified in the technical data.
Please see our General Terms and Conditions for further information.
Service addresses for repair acceptance and collection points can be found on the
product information enclosed with the product as well as on our website (www.minebea-
intec.com).
Should you have any further questions, please contact your local service representative or
our service center.
Minebea Intec GmbH
Repair center
Meiendorfer Strasse 205 A
22145 Hamburg, Germany
Phone: +49.40.67960.333
service.HH@minebea-intec.com
We reserve the right not to accept products that are contaminated with hazardous
substances (ABC contamination).
15 Disposal X3 Process Indicator PR 5410
Minebea Intec EN-345
To Next Page
Loading...
