7.5.7 Creating a PIN code using the front-panel keys
The Setup menu can be protected from unauthorized access with a PIN code defined by
the user.
Setting up a PIN code
Entering the PIN code
SEArCH appears on the display.
5. Press OK.
YES appears on the display.
6. Press OK.
A search for connected load cells is conducted and the dead load is set
immediately thereafter.
7. Press "Exit" to exit the Setup menu.
1. Press
.
SEtuP appears on the display.
2. Press OK.
The "Cd" calibration menu flashes.
Cd 000 appears on the display.
3. Press
multiple times to select "oP."
oP 060 appears on the display.
4. Press
to change the parameter number ("000" flashes).
5. Press to select the parameter number.
oP 061 appears on the display.
6. Press OK.
PIn appears on the display.
7. Press OK.
000000 (= no prompt) appears on the display.
8. Press the cursor keys to enter a PIN code.
9. Press OK to save the PIN code.
10. Press
.
SEtuP appears on the display.
X3 Process Indicator PR 5410 7 Getting started
EN-138 Minebea Intec
To Next Page
Loading...
