[Hostname]
NOTICE
Potential network problems
The host name must be unique in the network!
The user-defined device name is subject to the following restrictions:
- Minimum number of characters: 2, maximum number of characters: 24.
- The first character must be a letter. Spaces are not permitted.
- 0–9, A-Z (not case-sensitive) are permitted.
- - or . may be included, but neither at the end nor in succession.
Input: via keypad
[DHCP]
If ☑ is checked (presettings: DHCP selected), the server automatically allocates the
IP address, subnet mask, and default gateway.
If ☐ is not checked, the settings [IP address], [Subnetmask] and [Default gateway] must
be defined in consultation with the responsible system administrator.
[VNC client]
This address can be used to allow access to the interface for remote access, see following
table.
User address Description
VNC client 0.0.0.0. Access via VNC not permitted.
VNC client 172.24.21.101 Access only from client machine with this address.
VNC client 172.24.21.255 Access from any client with address within range
172.24.21.1 - ..254.
VNC client 255.255.255.255 Access from client with any address.
Note:
When setting [IP Address], [Subnetmask], and [Default gateway], please consult with
your system administrator.
Press
to return to the Setup menu and to save the changes.
7.18.7 Configuring limit values
Note:
This menu item is only available if under
-[Operating parameter]- [Application]
"Standard" has been selected.
The parameters for limits are set under this menu item.
X3 Process Indicator PR 5410 7 Getting started
EN-244 Minebea Intec
To Next Page
Loading...
