3 Device description
3.1 General notes
The instrument is equipped with a six-digit 7‑segment display and additional status
displays. Local operation is possible using the 6 double function keys.
The instrument contains two applications:
- Default
- EasyFill
Most functions are supported by both applications.
A few functions are application-dependent.
3.2 Overview of the device
- Accuracy 10,000 e (class III) for the weighing electronics
- High-speed conversion with measurement times from 10 msec
- Weight display with status via transflective, 6-digit, 7-segment display
- Alibi memory
- 6 function keys for operation on the front panel
- Enclosed front: IP65, back: IP30
- LAN adapter with 10/100 Mbit/s for data transfer, calibration, parameterization
- Integrated RS-232 interface for, e.g., printer or remote display
- Can be expanded using the following plug-in cards (2 slots):
- Serial input and output card 2× PR 5510/02 or 2× PR 5510/04
1× PR 5510/02 and/or 1× PR 5510/04
- CANopen interface PR 5510/05
- Analog input and output card PR 5510/07
- BCD output card PR 5510/08 (Slot 2 only) or PR 5510/09 (Slot 2 only)
- Opto-decoupled input and output card PR 5510/12
- Fieldbus cards PR 1721/3x
- Electrically isolated interfaces (except RS-232)
- Wide range power supply for U
AC
= 100 to 240 V, protection class I (protective
grounding conductor)
- Version PR 5410/01 for U
DC
= 24 V
- Plug-in connections inside the device for load cells, inputs/outputs, LAN adapter
- Installation as control panel or control cabinet device
- Calibrate using the front keypad or PC tool (browser/VNC); calibrate the Pendeo®
load cells and Connexx modules using the PC tool only
- Calibration using weights according to the mV/V method or directly using load cell
data (smart calibration)
X3 Process Indicator PR 5410 3 Device description
EN-16 Minebea Intec
To Next Page
Loading...
Need help?
General
