Minebea Intec X3 User Manual

7.18 General parameter settings
The parameter settings which are not related to the weighing electronics are divided into
several ranges.
- Serial interfaces [Serial ports parameter]
- Date and Time [Date & Time]
- Operating parameter [Operating parameter]
- Printing parameter [Printing parameter]
Note:
This menu item is only available if under -[Operating parameter]- [Application]
"Standard" has been selected.
- Fieldbus parameter [Fieldbus parameter]
- Network parameter [Network parameter]
- Configuring limits [Limit parameter]
Note:
This menu item is only available if under -[Operating parameter]- [Application]
"Standard" has been selected.
- Configuring digital inputs and outputs [Digital i/o parameter]
Note:
This menu item is only available if under -[Operating parameter]- [Application]
"Standard" has been selected.
- Configuring analog output [Analog output parameter]
7.18.1 Selecting and configuring serial interfaces
The interfaces are configured under this menu item.
7 Getting started X3 Process Indicator PR 5410
Minebea Intec EN-227

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English