Minebea Intec X3 - Accessories

4.6 Accessories
4.6.1 General information
The main board has three additional function-specific slots. These slots can
accommodate the following cards:
- "Slot 1" and "slot 2": PR 5510/02 (see Chapter 4.6.2), PR 5510/04 (see Chapter 4.6.3),
PR 5510/05 (see Chapter 4.6.4), PR 5510/07 (see Chapter 4.6.6), PR 5510/12 (see
Chapter 4.6.11)
- "Slot 2": PR 5510/08 (see Chapter 4.6.7), PR 5510/09 (see Chapter 4.6.8)
- "Slot 4": PR 1721/3x fieldbus card (see Chapter 4.6.13, 4.6.14, 4.6.15, 4.6.16, 4.6.17,
4.6.18)
WARNING
Working on the device while it is switched on may have life-threatening
consequences.
Before installing or removing a plug-in card, the device must be disconnected from
all voltage sources.
4 Device installation X3 Process Indicator PR 5410
Minebea Intec EN-57