4.6.7 BCD output (open emitter)
This interface card has the type designation PR 5510/08.
A PR 5510/08 card can be plugged into "Slot 2" only.
The plug-in card is used for BCD-coded output of a 5-decade weight value.
Cyclical output of the weight value with 4-bit (plus or minus sign, stability, error). The
value is intrinsically consistent and can be output continuously or the digital input
"DATA_IN" control can be used to freeze (hold) the value.
Before installing the card, set switches "S101" and "S102".
Specifications
Description Data
Connection D-SUB female connector, 26-pin
Output: Qty 5 digit BCD + preceding sign
Input: Qty 1 bit "DATA_IN"
Output level Shared collector at +Uext., open emitter
External supply U
DC
= +5 V…+24 V
4 Device installation X3 Process Indicator PR 5410
Minebea Intec EN-81
To Next Page
Loading...
