Minebea Intec X3 User Manual

Saving and exiting
7.5.4 Displaying the calibration data of the internal WP using the front-panel keys
LoAd (dead load with empty scale) appears on the display.
9. Press OK.
unLoAd appears on the display.
10. Empty the scale.
11. Press OK.
A weight value for the dead load appears on the display.
12. Press OK.
00000.0 kg appears on the display.
The dead load is set.
13. Press OK.
Cd 004 appears on the display.
14. Press "Exit."
SAVE appears on the display.
15. Press OK.
YES appears on the display.
16. Press OK.
SAVE ... appears on the display during the save process.
17. Press "Exit" to exit the Setup menu.
18. If no other calibration data or parameters are going to be set, the CAL switch must be
closed now; see Chapter 7.1.3.1.
1. Press
.
SEtuP appears on the display.
2. Press OK.
The "Cd" calibration menu flashes.
Cd 000 appears on the display.
3. Press OK to select the menu item.
CALIb appears on the display.
X3 Process Indicator PR 5410 7 Getting started
EN-134 Minebea Intec

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English