Minebea Intec X3 - Filling; Extended functions; Hardware test

8.5 Filling
Requirements:
- Weighing point is calibrated.
- Production mode is configured; see Chapter
8.4.1.
- Digital inputs and outputs are configured (optional); see Chapter 8.4.2.
- Material (product) is configured; see Chapter 8.4.3.
- Printout is configured (optional); see Chapter 8.4.4.
Example:
- Filling mode: Net filling (B1)
- Interaction mode: VNC
- Digital outputs 1, 2: SPM-Adresse %MX 1162 (coarse)/1163 (fine)
- Material ID: 2
Procedure:
A prompt window opens.
9. Press the [Yes] softkey to save the changes.
1. Select [Dosing] and confirm.
8 Production X3 Process Indicator PR 5410
Minebea Intec EN-285