Save the data with [Yes].
Press [No] to exit the menu without changing data.
7.18.4 Print parameters
Note:
This menu item is only available if under
-[Operating parameter]- [Application]
"Standard" has been selected.
The print parameters are set under this menu item.
Open the menu via
-[Printing parameter].
[Print mode]
Printing mode
Selection: <Print selected items>, via Nice Lable [configure printout with Nice Label
Express (NLE)].
[1. … 6. Item]
Print layout for line 1…6
Selection: -none- (no printout; selected if fewer than 6 elements will be printed), Gross
weight, Net weight, Tare weight, Date & Time (printed in format DD.MM.YYYY
HH:MM:SS), Sequence number (counter for individual print orders, max. 6 digits,
#000001 comes after #999999), CR/LF (carriage return and line feed), Device address,
displayed weight, Formfeed
7 Getting started X3 Process Indicator PR 5410
Minebea Intec EN-239
To Next Page
Loading...
