Minebea Intec X3 - Replacing Fuses

2.8.3 Replacing fuses
2.8.3.1 Changing fuses in an ex area
WARNING
Explosion possible if replacement is not done correctly!
It is only permitted to replace fuses in the PR 5410 when used in the ex area, if the
atmosphere is not potentially explosive.
Only the fuses listed in Chapter
17.3.3 are permissible.
2.8.3.2 Replacing fuses in a secure area
WARNING
Damage from overheating.
The use of repaired fuses and bypassing the fuse holder is prohibited.
Only the fuses listed in chapters 17.3.2 and 17.3.3 are permissible.
2 Safety instructions X3 Process Indicator PR 5410
Minebea Intec EN-15