17 Technical data
17.1 Note on using "free software"
The firmware on the PR 5410 device contains "free software" that is licensed under the
- GNU General Public License (GPL) Version 2, June 1991, and
- GNU Lesser General Public License (LGPL) Version 2.1, February 1999.
This "free software" developed by third parties is copyrighted and is provided free of
charge. The license terms and conditions of Free Software Foundation, Inc. in English are
included in the delivery of the device. The source text for the terms and conditions can be
found on the CD-ROM included.
17.2 Decoding the serial number
30 252 00015
30 252 00015
Location no.:
30 = Hamburg
Code for the year/month:
252* = April 2010
Current number
* Is increment according to the year group table of Minebea Intec.
17.3 General data
The following characteristics are valid after a warm-up time of at least 60 minutes
(reference temperature 23 °C).
17.3.1 Backup for date/time
The lithium battery for backing up the date/time chip is activated before the instrument
leaves the factory.
Device continuously connected to mains voltage up to 10 yearsLifespan
Device not connected to mains voltage for some time
(e.g.in storage)
up to 7 years
17.3.2 Supply voltage connection 230 V AC
Supply voltage U
AC
= 100 to 240 V +10%/-15%, 50/60 Hz
Max. power consumption 11 W/13 VA
Primary fuse 800 mAT; 5 × 20 mm;
17.3.3 Supply voltage connection 24 V DC
Supply voltage U
DC
= 24 V ±20%
Max. power consumption 11 W
Primary fuse 1,6 AT; 250 V AC; 5×20 mm
Littlefuse, order number: 021801.6
MXP
X3 Process Indicator PR 5410 17 Technical data
EN-354 Minebea Intec
To Next Page
Loading...
Need help?
General
