Minebea Intec X3 User Manual

- Software configuration of the interface cards, e.g., for remote display or printer
- The "EasyFill" application allows for quick and reliable filling and emptying of vessels
(for functional description, see Chapter 6.1).
- Analog test for the weighing electronics
- Overwrite protection using CAL switch on the main board
3.2.1 Communication protocols
For the internal RS-232 or external RS-232 + RS-485 (accessories):
- Remote display protocol
- Printer
- ModBus-RTU (slave)
- SMA protocol
- xBPI protocol
- EW-Com protocol
Field bus slave (accessories):
- PR 1721/31 ProfiBus DP
- PR 1721/32 InterBus-S
- PR 1721/34 DeviceNet
- PR 1721/35 CC-Link
- PR 1721/36 ProfiNet I/O
- PR 1721/37 EtherNet-IP
For the internal LAN:
- ModBus-TCP
- Ethernet TCP/IP
- OPC
3.3 Housing
3.3.1 General notes
The instrument has a housing of aluminum with IP65 front. It can be used as a control
panel version.
The keypad and the display form one unit with the front. A rectangular cut-out is required
for the installation. Cable connections are made at the back of the housing.
The ambient conditions specified for the instrument must be observed (see
Chapter
17.4.1).
The gaps for attaching 2 plug-in cards are closed by blind plates.
3 Device description X3 Process Indicator PR 5410
Minebea Intec EN-17

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English