Minebea Intec X3 User Manual

Entering the SUPER PIN code
If the PIN code is lost, the Setup menu can be unlocked with SUPER PIN code
"212223."
7.5.8 Deleting the PIN code using the front-panel keys
11. Press OK.
PIn appears on the display.
12. Press OK.
000000 appears on the display.
13. Press the cursor keys to enter the PIN code.
14. Press OK.
If a wrong PIN code has been entered, PInWro appears on the display.
15. Press OK.
000000 appears on the display.
16. Press the cursor keys to enter the correct PIN code.
The "Cd" calibration menu flashes.
If the right PIN code has been entered, Cd 000 appears on the display.
17. Press
.
SEtuP appears on the display.
18. Press OK.
PIn appears on the display.
19. Press OK.
000000 appears on the display.
20. Press the cursor keys to enter SUPER PIN code "212223."
21. Press OK.
1. Press .
SEtuP appears on the display.
2. Press OK.
7 Getting started X3 Process Indicator PR 5410
Minebea Intec EN-139

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English