Minebea Intec X3 - Connexx Module

4.6.5 Connexx module
4.6.5.1 Technical data
The Connexx module is the electronic part of a so-called "digital load cell".
The analog weight data (mV/V) is digitalized using a 24-bit ΣΔ converter.
A micro-controller converts the data into a CAN bus signal and transmits the processed
signals via the CANopen interface PR 5410/05 to the PR 5410 for further processing.
① M12 plug connector, female
② M12 plug connector, male
③ Status LED
④ Load cell cable
Technical data
Description Data
Connection PR 5410/05 or previous modu-
le (power supply connection) ②
M12 plug connector, male
Connection to the next Module (CAN bus)
①
M12 plug connector, female
Supply voltage nominal U
DC
= 24 V (max. 18–36 V)
Supply voltage load cell U
DC
= approx. 5 V
Connecting cables
Protection classes in compliance with EN 60529
IP68:
Dust-proof and leak-tight against water in-
gress, with harmful effects when immer-
sed, (1.5 m water depth, 100 h).
Status LED
LED status Color Function
flashing red - No communication
- Data defect
duration red no weight values provided
X3 Process Indicator PR 5410 4 Device installation
EN-72 Minebea Intec