4.6.18 EtherNet/IP interface
The EtherNet/IP interface card has the type designation PR 1721/37.
The fieldbus card is equipped with a standard RJ-45 socket ② for network connection.
It contains powerful UDP/IP connecting circuitry with transfer rates of 10 and 100 Mbit/s.
The card is inserted into "Slot 4" ① (see Chapter 4.6.1).
Technical data
Description Data
Transfer rate 10 Mbit/s and 100 Mbit/s
Auto-detection (100, FullDX)
Protocol EtherNet IP
Connection mode Network
Configuration EDS file
"sag_5410_ethernetip.eds"
Potential isolation Yes
Cable type Twisted pairs, screened, e.g., patch cable CAT5 Autolink (stra-
ight or crossover)
Cable impedance
150 Ω
Cable length to HUB Max. 115 m
X3 Process Indicator PR 5410 4 Device installation
EN-116 Minebea Intec
To Next Page
Loading...
