1. Select [Configuration printing] and confirm.
The configuration window appears.
2. Select [Number printouts], enter the number of printouts between 1…10, and confirm.
3. Select [Sequence number], change the sequence number if necessary, and confirm.
4. Select [Use NLE]. Check the ☑ box to activate printing with NiceLabelExpress.
5. Select [Line 1]…[Line 6] and confirm.
Selection: -none- (no printout; selected if fewer than 6 elements will be printed),
Material name, Gross weight, Net weight, Tare weight, Set point, Date & Time
(printed in format DD.MM.YYYY HH:MM:SS), Sequence number (counter for
individual print orders, max. 6 digits, #000001 comes after #999999), CR/LF
(carriage return and line feed), Form feed
A selection window opens.
6. Confirm selection.
7. Press the [Print] softkey to print out the configuration if necessary.
8. Press to exit the window.
X3 Process Indicator PR 5410 8 Production
EN-284 Minebea Intec
To Next Page
Loading...
