Minebea Intec X3 User Manual

7.18.1.1 Printer protocol
Select - [Serial ports parameter] and confirm.
The following window opens.
1. Select [Printer] and confirm.
A selection window opens.
2. Select the desired interface and confirm.
The selected interface is displayed.
3. Press the [Param] softkey to set the parameters.
X3 Process Indicator PR 5410 7 Getting started
EN-228 Minebea Intec

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English