5. Press OK.
Pro.nEt appears on the display.
6. Press OK.
FP 097 appears on the display.
7. Press OK.
IP.Addr appears on the display.
8. Press OK.
The more significant part of the address* 000.000. appears on the display.
9. Press the cursor keys to select and set the desired numbers.
10. Once the last number is selected and set, press to set the less significant part of
the address*.
000.000. appears on the display.
11. Press the cursor keys to select the desired numbers.
12. Press OK.
FP 098 appears on the display.
13. Press OK.
SubnEt (subnet mask) appears on the display.
14. Press OK.
The more significant part of the mask* 255.255. appears on the display.
15. Press the cursor keys to select and set the desired numbers.
16. Once the last number is selected and set, press to set the less significant part of
the mask*.
255.000. appears on the display.
17. Press the cursor keys to select the desired numbers.
18. Press OK.
SAVE appears on the display.
19. Press OK.
YES appears on the display.
20. Press OK.
7 Getting started X3 Process Indicator PR 5410
Minebea Intec EN-141
To Next Page
Loading...
