Minebea Intec X3 User Manual

020.128. (example) appears on the display.
11. If DHCP "oFF" is selected: Press the cursor keys to select and set the desired numbers.
12. Press OK.
nP 082 appears on the display.
13. Press OK.
SubnEt (subnet mask) appears on the display.
14. Press OK.
The more significant part of the mask* 255.255. appears on the display.
15. Press the cursor keys to select and set the desired numbers.
16. Once the last number is selected and set, press to set the less significant part of
the mask*.
255.255. appears on the display.
17. Press the cursor keys to select and set the desired numbers.
18. Press OK.
nP 083 appears on the display.
19. Press OK.
GtAddr (gateway) appears on the display.
20. Press OK.
The more significant part of the address* 000.000. appears on the display.
21. Press the cursor keys to select and set the desired numbers.
22. Once the last number is selected and set, press to set the less significant part of
the mask*.
000.000. appears on the display.
23. Press the cursor keys to select and set the desired numbers.
24. Press OK.
nP 084 appears on the display.
25. Press OK.
CLIEnt (VNC client) appears on the display.
26. Press OK.
7 Getting started X3 Process Indicator PR 5410
Minebea Intec EN-143

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English