Minebea Intec X3 User Manual

[Zero correction]
The zero correction in use is displayed.
[Communication error count]
The communication errors (timeouts) for the load cells are counted here in
ascending order and displayed.
[LC 1…n]
Bar graph display
The bar graph shows three areas:
A
Dead load (can be changed by calibration)
B
Maximum capacity E
max
(max. capacity of load cell) including dead load (load cell,
cannot be changed)
C
Max. usable load including dead load (load cell, cannot be changed)
The colors have the following meanings:
Red
Weight value is above maximum capacity (overload) or below -¼d
Green
Weight value is within tolerances
Orange
Weight value is above maximum capacity E
max
(max. capacity of load cell)
[No ID]
The serial number is hidden.
[Show ID]
The serial number is displayed.
2. Select the desired load cell and press the [Info] softkey.
The load cell data is displayed:
7 Getting started X3 Process Indicator PR 5410
Minebea Intec EN-267

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English