Minebea Intec X3 User Manual

Note:
The SPM address %MX for an unused digital input = 0.
2. Select [Configuration digital inputs] and confirm.
The following window opens:
3. Select inputs 1…3. Use the keypad to enter and confirm a corresponding SPM address
%MXxxx (see Chapter 13.4).
4. Press to exit the window and to save the changes.
5. Select [Configuration digital outputs] and confirm.
X3 Process Indicator PR 5410 8 Production
EN-280 Minebea Intec

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English