Minebea Intec X3 User Manual

9.5.1.2 Loading the software on your notebook/PC
FLASH follows on the display.
4. Press OK.
EtHEr appears on the display.
5. Press OK.
The device waits for address assignment by the server.
172.024. The more significant part of the IP address is displayed for approx.
2 seconds.
dHCP... appears on the display.
6. Make sure to note down the digit sequence, because it must be entered into the
"FlashIt!32" window subsequently.
021.081. The less significant part of the IP address is displayed for approx. 2
seconds.
7. Make sure to note down the digit sequence, because it must be entered into the
"FlashIt!32" window subsequently.
Now the device is ready to load the software.
FLASH? appears on the display.
1. Click the relevant file in the "Explorer" with the mouse and drag it into the [Select]
window, (or use 'Copy and paste').
2. Under [COM-Port] select "Network" and enter the devices IP addresses.
3. Click [Flash] to start the procedure.
As soon as software loading is completed the device will be re-started.
4. Load next file, as described.
9 Extended functions X3 Process Indicator PR 5410
Minebea Intec EN-305

Minebea Intec X3 Specifications

General

Brand	Minebea Intec
Model	X3
Category	Measuring Instruments
Language	English