SPM address Data type R/W Function
W104 (B209) WORD R EasyFill only: Report: Material ID
B212…229 BYTE R EasyFill only: Report: Material name
D58 DINT R EasyFill only: Report: Batched weight
D59 DINT R EasyFill only: Report: Set point
D60 DINT R EasyFill only: Report: Preset
D61 DINT R EasyFill only: Report: Material overshoot (OVS)
D62 DINT R EasyFill only: Report: Calming time [ms]
D63 DINT R EasyFill only: Report: Tolerance below set point
D64 DINT R EasyFill only: Report: Tolerance above set point
D67 DINT R EasyFill only: "Last_Error" error, see Chapter
16.6.2
OPC server only
R264 REAL R Gross weight (as floating point number)
R265 REAL R Net weight (as floating point number)
R266 REAL R Tare weight (as floating point number)
R267 REAL R Current gross/net weight selected with X72 (as floating point
number)
R270 REAL R Max weight (FSD = Full Scale Deflection) (as floating point number)
R271 REAL R Min weight (as floating point number)
R272 REAL R Report: Gross weight (as floating point number)
R273 REAL R Report: Net weight (as floating point number)
R274 REAL R Report: Tare weight (as floating point number)
R280 REAL R Standard only: Limit: Limit 1 on (as floating point number)
R281 REAL R Standard only: Limit: Limit 1 off (as floating point number)
R282 REAL R Standard only: Limit: Limit 2 on (as floating point number)
R283 REAL R Standard only: Limit: Limit 2 off (as floating point number)
R284 REAL R Standard only: Limit: Limit 3 on (as floating point number)
R285 REAL R Standard only: Limit: Limit 3 off (as floating point number)
R287 REAL R/W Write the value in the preset tare memory (as floating point num-
ber).
L17
X1088…1151
LWORD
BOOL
W
R
SPM out
Output
L18
X1152…1215
LWORD
BOOL
W
R
SPM out AND coarse
Output and coarse
L19
X1216…1279
LWORD
BOOL
W
R
SPM out AND fine
Output and fine
X3 Process Indicator PR 5410 13 SPM
EN-340 Minebea Intec
To Next Page
Loading...
