Technical data
Description Data
Connection D-Sub female connector, 15-pin
Output: Number 1 active current output:
0/4…20 mA (max. 24 mA), 10 V output voltage via external
500 Ω resistor
Output: Function according to gross weight/net weight/display, configurable
Output: Range 0/4… to 20 mA, configurable
Output: Resolution Internal 16 bits = 65536 counts,
resolution of 20,000 @ 20 mA
Output:
Linearity error
@ 0 to …20 mA: <0.04%
@ 4 to …20 mA: 0.02%
Output:
Temperature error
<100 ppm/K
Output:
Zero point error
0.05%
Output: Max. error <0.1 %
Output: Load
Max. 0… to 500 Ω
Output:
Protected against short-
circuit
yes
Output:
Potential isolation
yes
Inputs: 4× channel current or voltage input
0…20 mA, input impedance 250 Ω
0…10 V, input impedance 100 kΩ
0…5 V, input impedance >10 MΩ
Input: Resolution 3,000 internal counter steps
e.G. 0…20 mA/0…10 V
Input: Accuracy 0.2 %
Input: Linearity error <0.03%
Input: Temperature error <50 ppm/K
Input: Reserve ±15%, i.e. –1.5 V…+11.5 V
Input: Potential isolation no
Cable type Screened twisted pair (e.g., LifYCY 2x2x0.20)
Cable length <150 m screened
Accessories D-sub plug, 15-pin
4 Device installation X3 Process Indicator PR 5410
Minebea Intec EN-79
To Next Page
Loading...
