2-4 LICENSE AND USER ACCOUNT
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
2.2 User Management
The user management is a function to manage an authorized user to access to a
network system, and to prevent an unauthorized user from accessing to the network
system.
2.2.1 Overview
2.2.1.1 Access Level
iPASOLINK provides three user access levels with different privilege as shown in the
table below. For details of each access level and its available operations, refer to
Table 2-3 User Access Privilege Levels.
Following describes the terms, such as
upload and download mentioned in the table
above:
Upload is to copy a file from NE to an external storage, such as WebLCT PC.
Download is to copy a file from an external storage to the internal storage of
equipment.
2.2.1.2 User Group
User Group configuration allows a user to manage the protocol type and access level
for each group. A user of the specified User Group in iPASOLINK will be assigned
with the pre-defined protocol and access level of the group. In addition to the three
default user groups, up to six user groups can be added. The default user groups are
shown below:
NOTE: Options specified to the default user groups cannot be modified.
Table 2-1 Access Levels
Component Available Task File Operation SNMP Operation
Operator View the equipment configuration and status. Upload only Obtain
Config In addition to tasks available by Operator level, man-
agement of radio base band and switching function.
Upload
Download
Obtain
Set
Admin In addition to tasks available by Config level, man-
agement of user accounts and time adjustments.
Upload
Download
Obtain
Set
Table 2-2 User Group Profile
Group Name Classification FTP SSHv2 SFTP HTTP HTTPS SNMP Access Level
OPERATOR Unchangeable
✔✔✔✔ ✔ ✔
Operator
CONFIG Unchangeable
✔✔✔✔ ✔ ✔
Config
ADMIN Unchangeable
✔✔✔✔ ✔ ✔
Admin
To Next Page
