SECURITY MANAGEMENT 3-29
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
3.6 NTP
3.6.1 Enable NTP
Procedure 3-7
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then
its submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears.
3. Scroll down the main window until the NTP option appears.
4. Click the
NTP link.
Figure 3-26 Service Status Setting Window (NTP)
The NTP Setting box appears.
To Next Page
