SECURITY MANAGEMENT 3-41
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
3.8.2 Remove Registered NTP Authentication Key
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then its
submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears.
3. Click
Clear NTP Auth Key tool button.
Figure 3-46 Service Status Setting Window
4. Clear NTP Auth Key option window appears. Select an index number of
Authentication Key to be removed.
Figure 3-47 Clear NTP Auth Key Option Window
5. Confirmation dialog box appears. Click the OK button to proceed.
Clear NTP Auth Key tool button
To Next Page
