NEC iPASOLINK EX Advanced - SNMP Trap Entry; Set;Modify SNMP Trap Entry

SECURITY MANAGEMENT 3-23
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
3.5 SNMP Trap Entry
This option configures the SNMP Trap:
3.5.1 Set/Modify SNMP Trap Entry
Procedure 3-5
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then
its submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears.
3. Scroll down the main window till SNMP Trap option box appears.
4. Click SNMP Trap Entry No. of the
SNMP Trap Entry field.
Figure 3-17 Service Status Setting Window (SNMP Trap Entry)
The SNMP Trap Entry option window appears.
SNMP Trap Entry No.