NEC iPASOLINK EX Advanced - Delete Entry

NETWORK MANAGEMENT 5-35
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
5.6.1.3 Delete Entry
Procedure 5-13
1.
Launch and log in to WebLCT.
2. In the MENU frame on the left, expand Network Management to select IP
Access Control Setting
. The IP Access Control Setting window appears.
3. In the Input Filter List tabbed page, click the Delete Entry tool button on the tool
bar.
Figure 5-52 IP Access Control Setting Window
4. The Input Filter Entry (Delete) option window appears. Enter the target Entry
No., then click the
OK button.
Figure 5-53 Input Filter Entry (Delete) Option Window
Input Filter List tab
Delete Entry tool button