NEC iPASOLINK EX Advanced - TX Power Setting; ATPC Mode

Set MODEM Function 7-5
iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING GGS-000547-01E
7.2 TX Power Setting
Specify the thresholds of TX Power and RX Power in MTPC/ATPC configuration.
7.2.1 ATPC Mode
Procedure 7-2
1. Launch and log in to WebLCT.
2. In the MENU frame on the left, expand Provisioning, then its submenu MODEM
Function Setting
to select TX Power Setting. The TX Power Setting window
appears.
3. Click a MODEM Link to configure:
Figure 7-6 TX Power Setting Window
4. TX Power Setting option window appears. Assign the appropriate value to each
parameter:
Figure 7-7 TX Power Setting Option Window
click