3-2 SECURITY MANAGEMENT
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
3.1.1.2 Send Trap
iPASOLINK can send SNMPv1 trap initiatively to UDP Port 162. Except for sending
the trap to the connected NMS, user can specify an IP address of one additional
destination. A user can also specify the community name and UDP Port.
3.1.1.3 User Application (Log)
iPASOLINK records the names of logged-in users in the log file.
3.1.2 SNMPv2c
SNMPv2c (Simple Network Management Protocol Version 2c) is a communication
protocol to monitor/control NEs on an IP network, and is a revised version of
SNMPv1. The differences between v1 and v2c are that the GetBulk, the inform
request, unified packet format of each PDU are added, conforming to SMIv2 and
following RFCs:
iPASOLINK enables SNMPv2c to support the following functions:
Table 3-3 RFC Standards
RFC No. Title
SNMPv2c
RFC 1901 Introduction to Community-based SNMPv2
RFC 3416 Version 2 of the Protocol Operations for the Simple Network Management
Protocol (SNMP)
RFC 3417 Transport Mappings for the Simple Network Management Protocol (SNMP)
RFC 3428 Management Information Base (MIB) for the Simple Network Management
Protocol (SNMP)
RFC 3584 Coexistence between Version 1, Version 2, and Version 3 of the Internet-
standard Network Management Framework
SMIv2
RFC 2578 Structure of Management Information Version 2 (SMIv2)
RFC 2579 Textual Conventions for SMIv2
RFC 2580 Conformance Statements for SMIv2
To Next Page
Loading...
