NEC iPASOLINK EX Advanced - NTP Auth Key Setting; Create;Modify NTP Authentication Key Setting

3-38 SECURITY MANAGEMENT
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
3.8 NTP Auth Key Setting
3.8.1 Create/Modify NTP Authentication Key Setting
1. Launch and log in to WebLCT.
2. In the
MENU frame on the left, expand Network Management Setting, then its
submenu
Security Management to select Service Status Setting. The
Service Status Setting window appears.
3. Scroll down the main window until
NTP Auth Key Setting option appears.
4. Click the number of Auth Key Index link.
Figure 3-41 Service Status Setting Window (NTP Auth Key Setting)
NTP Auth Key Setting (Modify) option window appears.
Auth Key Index