NEC iPASOLINK EX Advanced - Bridge Setting

5-16 NETWORK MANAGEMENT
GGS-000547-01E iPASOLINK EX Advanced: SET NETWORK AND SYSTEM PROVISIONING
5.3 Bridge Setting
Procedure 5-5
1.
Launch and log in to WebLCT.
2. In the MENU frame on the left, expand Network Management Setting to select
Bridge Setting. The Bridge Setting window appears.
3. Click Setup tool button on the tool bar.
Figure 5-20 Bridge Setting Window
The Bridge Setting option window appears.
4. Assign the appropriate value to each parameter:
Setup tool button